利用地震属性钻前预测井壁稳定性

钻前准确预测井壁稳定性是防止钻进过程中井壁失稳的有效手段。声波时差和地层密度是井壁稳定分析的两个关键参数。根据地震记录与地层声波时差及密度之间存在的非线性关系，提出了利用地震属性钻前预测井壁稳定性的方法。从井旁地震记录中提取地震属性，通过RBF神经网络在已钻井段的地震属性与声波时差及密度之间建立起映射模型，以此为基础预测待钻地层的声波时差和密度。运用预测结果结合井壁稳定力学模型，确定岩石力学参数和地应力状态，计算井壁坍塌压力和破裂压力，确定安全钻井液密度窗口，实现钻前井壁稳定预测。该方法在塔里木油田的应用中取得了良好的预测效果。     

一种快速CRC 算法①的硬件实现方法

介绍了CRC校验算法的硬件电路实现方法。CRC校验广泛应用于通信、存储系统，在串行CRC实现的基础上，对电路结构提出了改进的方案，并实现了CRC的并行计算，由此进一步可以适用于任意位数据宽度的数据输入情况。     

利用VB开发分布式监控系统

介绍用分布式模块与VB共同开发的监控系统。     

五氧化二钽薄膜的制备及其I-U特性

本文利用脉冲直流反应磁控溅射的方法制备了五氧化二钽 (Ta2 O5)薄膜 ,俄歇电子能谱仪测试了薄膜的成分含量 ,椭偏仪测试了Ta2 O5薄膜的厚度和折射率 ,XRD分析了薄膜的晶体结构 ,并且分别研究了氧气含量、基底温度等成膜工艺对薄膜的影响。研究结果表明薄膜的成分主要是由氧气含量决定的。利用金属 绝缘体 (介质膜 ) 金属 (MIM)结构初步对Ta2 O5薄膜进行了电学性能的测试 :皮安电流电压源测试了薄膜的I U特性 ,制备出的薄膜折射率在 2 1～ 2 2 ,MIM的I U特性曲线显示了较好的对称性和低的漏电流密度     

质子和中子的单粒子效应等效性实验研究

通过实验方法确定了高能质子和中子引起的单粒子效应等效关系，实验中采用金箔散射法降低了质子束流强度，并利用热释光剂量计（TLD）进行质子注量的监测，采用新研制的存储器长线实时监测系统，进行了64K位至4M位的SRAM器件单粒子效应实验，确定了两种粒子引起单粒子效应等效关系。     

行为级DSP算法描述的阵列处理器综合方法研究

本文提出了针对递归DSP算法的高层次系统综合流程,并以脉动(systolic)式处理器阵列结构实现.从DSP算法的FDDL行为级描述开始,经由编译及划分,产生数据相关流图(Data Dependency Graph),然后实现对算法流图的空间映射及时域规划,得到算法的信号流图(Signal Flow Graph),经时序重构,生成脉动阵列,最后实现对处理器单元的数据路径综合及控制器综合,并对处理器单元定位,本文同时提出了各设计阶段的算法策略及优化策略,并给出综合结果。     

无横梁高刚性轧机的结构分析

本文介绍了无横梁高刚性轧机的新颖结构，分析了该轧机高刚性及轴承长寿的原理。该轧机在现场使用中，取得了良好的效果。     

EFFECTS OF COLD EXPANSION OF A HOLE ON FATIGUE CRACK INITIATION LOCATION AND LIFE OF AN LY12CZ ALLOY

Abstract— In the present study the effects of cold expansion of a hole on the location of fatigue crack initiation and life of LY12CZ alloy sheets are experimentally investigated and a quantitative expression of fatigue crack initiation life presented. Test results and analysis show that there may exist an optimum amount of cold expansion, for which both the coefficient of the resistance to fatigue crack initiation and the threshold are increased, and that the direction of cold expansion has no appreciable effect on fatigue crack initiation life. Observations show that, after cold expansion the fatigue crack nearly always initiates on the final entry face from which the mandrel is introduced into the hole during the final cold expansion process. Therefore it may be thought that the entry face is less resistant to fatigue crack initiation. In addition, the assumption of equivalence of residual stresses and also the strain hardening conditions on both the entry and exit faces may be questionable.     

Gate and drain currents in off-state buried-type p-channel LDDMOSFETs

The buried-type p-channel LDD MOSFETs biased at high positive gate voltage exhibit novel characteristics: (1) the ratio of the drain to gate currents is about 1×10^-3 to 5×10^-3; and (2) the gate and drain currents both are functions of only the gate voltage minus the n-well bias. Such characteristics are addressed based on the formation of the surface n ⁺ inversion layer due to the punchthrough of the buried channel to the underlying shallow p-n junction. The measured gate current is due to the Fowler-Nordheim tunneling of electrons from this inversion layer surface and the holes generated within the high-field oxide constitute the drain current. The n⁺ inversion layer surface potential is found to be equal to the n-well bias plus 0.55 V. As a result, both the oxide field and the gate and drain currents are independent of drain voltage     

红外警戒系统的运动参数估计算法

通过对目标飞行轨迹的参数化建模，提出了由红外传感器对目标角度和辐射功率的测量实现对目标距离和其它位置、速度参数估计的算法，从而可以此作为目标威胁程度估计和目标特性识别的依据。仿真计算表明，该方法计算的精度高，对目标位置的初始先验值依赖程度较小。该算法也适合于其它测量体制的目标运动参数估计。